The Microclimate Ministat 100 thermostat is the perfect combination of value and reliability. With an industry leading 5 year warranty, the ministat 100 is the perfect reptile thermostat to control heat mats or other (non light emitting) heaters up to a maximum of 100w.
Compact, Mighty and packed full of digital technology. The big brother to the Ministat, the Ministat 600 has all the same great specs but with an increased maximum power output of 600w. Remember there is NO minimum load, so its just as good at controlling lower powered heaters as the ministat 100.
The Ministat has been a standard in the reptile industry for many years. The Ministat 600 ticks all the boxes as an affordable temperature control soloution for your reptile. On/Off temperature control is suitable for all types of heaters due to the temperature swing either side of the set point.
Control up to 600w of heaters from the one compact unit. High quality digital processesing combined with software developed and tested over many years ensures we are confident that the Ministat 600 is a device you can trust.
A recessed temperature control dial prevents any accidental changes to the set temperature so you can be certain that the temperature remains at the set point that you require.
With a temperature range of 19c to 35c the Ministat 600 has you covered for a wide range of reptiles. sensor.png IP Rated waterproof sensor ensures accurate temperature readings no matter the conditions.
The Microclimate B2 Pulse Thermostat is available in two temperature ranges;
Standard Range: 19-35C (B2)
High Range: 29-45C (B2HT)
Microclimate Pulse B2 and Pulse B2 High Temperature are digitally controlled thermostats offering Microclimate's HD pulse technology. The software developed over years allows Microclimate thermostats to pulse extremely smoothly and accurately. This provides the ultimate temperature control for non light emitting heat sources. Pulse B2 High Temperature can control any type of non light emitting heat source such as ceramics, heatmats, panel heaters etc.
No minimum load is required for Microclimate Pulse thermostats. Only the best electrical components go into building your Pulse B2 High Temperature and it is completely designed and manufactured in house in the United Kingdom. This allows our high standards to be maintained throughout software and manufacture.
Control up to 600w of heaters from the Pulse B2 High Temperature.
MistKing is renowned for their ultra high quality, high performance terrarium misting systems which are used by professionals and hobbyists worldwide. What sets mistking apart from other mistking systems its extremely fine mist, wide range of accessories and robust, long lasting pump and parts.
Despite their reputation and popularity, owning a mistking system is still affordable due to the starter model which incorporates all the essentials you need to get going whilst being fully upgradable as and when you need it to be.
Ultimate and Advanced systems are also available depending on your needs, to help you decide which model is right for you we have broken down a summary of each model:
Starter
The kit that gets you started. It contains all you need to mist a single enclosure whilst keeping all options for expansion firmly on the table as it can support up to 10 nozzles. Compatible with all 1/4" mistking accessories.
High Quality Pump (up to 10 nozzles)
Power Adapter
Digital Seconds Timer
1x "L" Style Misting Assembly
Reservoir Bulkhead with o-ring and plug
15 ft of 1/4" tubing
5 tubing clips with screws
Manual
Ultimate
When you want to step up the number of supplied accessories and purchase a system capable of running up to 20 nozzles. Compatible with all 1/4" mistking accessories.
Higher Quality Pump (up to 20 nozzles)
Power Adapter
Digital Seconds Timer
3x "T" Style Misting Assemblies
ZipDrip Valve (creates a dripless system)
Reservoir Bulkhead with o-ring and plug
25 ft of 1/4" tubing
1/4" manual ball valve
10 tubing clips with screws
Tubing cutter with collet toll
T Connector
L Connector
Cable Y connector (for connecting the zipdrip valve and pump together to the timer)
Manual
Advanced
Rather than a step up (the ultimate system would be the 'top' level system by any other standard) we suggest you think of the advanced as a slightly different type of system. With a 3/4" backbone and a super powerful pump capable of pressures up to 125psi, this system can be used in larger or more complex situations which include anywhere from 10 to 70+ nozzles. (MistKing do not recommend this system unless you are going to exceed 15-20 nozzles).
Large Capacity diaphragm pump with 3/8" fittings
24v Power Adapter
Digital Seconds Timer
3/8" metal reservoir bulkhead with plug
3/8" Ball Valve
35 ft of 1/4" tubing (to connect nozzles)
15ft of 3/8" tubing (to connect reservoir to pump and run nozzle 3/8" backbone)
12x "T" Misting assemblies
3x "L" misting assembles
2x Reducing tee Connections (3/8" to 1/4")
1x Reducing elbow Connection (3/8" to 1/4")
20x 1/4" tubing clips
10x 3/8" tubing clips
Manual
No matter which mistking system you purchase we know it won't be long until you want to upgrade parts and make your enclosures even more sophisticated. No matter what you need we aim to stock it here for you. If you need any assistance don't hesitate to get in touch with our expert team
