Digitally controlled thermostat offering Microclimate's HD Dimming technology. The software developed over years allows Microclimate Dimmers to dim extremely smoothly. This aids in the least disruption for your animal and the ultimate in temperature control.
Dimmer B1 can control any type of heat source whether it be light emitting or non light emitting. The same precise temperature control will be maintained.
No minimum load is required for Microclimate Dimming thermostats. So the Dimmer B1 is a real all rounder when it comes to controlling your heating requirements.
Only the best electrical components go into building your Dimmer B1 and it is completely designed and manufactured in house in the United Kingdom. This allows our high standards to be maintained throughout software and manufacture.
Control up to 600w of heaters from the Dimmer B1.
A recessed temperature control dial prevents any accidental changes to the set temperature so you can be certain that the temperature remains at the set point that you require.
Built in diagnostics are constantly running to ensure that your thermostat is running trouble free.
With a temperature range of 19c to 35c the Dimmer B1 (Standard) has you covered for a wide range of reptiles.
With a temperature range of 29c to 45c the Dimmer B1 High Temperature can cater for those reptiles who like higher temps.
the Dimmer B1 High Temperature can cater for those reptiles who like higher temps.
IP Rated waterproof sensor to ensure accurate temperature readings no matter the conditions.
The Microclimate Ministat 100 thermostat is the perfect combination of value and reliability. With an industry leading 5 year warranty, the ministat 100 is the perfect reptile thermostat to control heat mats or other (non light emitting) heaters up to a maximum of 100w.
The Microclimate EVO Connected Thermostat is one of the reptile markets most exciting and highly anticipated products in years and is set to take reptile keeping to a whole new level.
In summary this thermostat has it all..
Multiple channels to control heating and lighting and monitor temperatures
Timing modes (per channel)
Simple: Constant or Day & Night
Advanced: Multi 8 Settings, Periodic, Seasons
All new high quality, colour, capacitative touch screen with large easy to read display
IP Rated waterproof sensor on every channel (2.5m cables)
Seasons Mode allows the recreation of a whole years environmental cycle
Ramp Times: control the length of time between temp changes for more natural climate control
Power output level shown per channel
Visual and Audible Alarms
Real time fault detection
Built in mounting solution for both the display and main control box allowing for easy, secure installation
Customise channel and thermostat names
Single Cable to the display allowing other cables to be kept out of sight with the main control box
Wifi Connectivity allowing real time monitoring and control of your enclosures from anywhere in the world (via iOs or android apps)
Web Browser remote dashboard
Cloud connectivity with 12 months of data logging for each channel on the app
Push notifications if an alarm is triggered, there is a power cut or your thermostat goes offline
Over the air updates included to keep your thermostat up to date
Generate reports for your whole collection and export the data to csv file
View multiple thermostats on one app
(note wifi is needed for app or cloud features)
1200w max load (600w max per channel)
Designed and manufactured in the United Kingdom
Full 5 Year Warranty
Evo Connected 2
Channel 1: Pulse/Dimming
Channel 2: On/Off
This model is perfect for a vivarium with a single heat source (e.g. a basking light or ceramic bulb) and a separate UVB lighting system (e.g. a UVB light source). In this scenario you would get complete automation of the day and night cycles and temperature readings on both sensors, allowing you to simultaneously record temperatures in two different areas of the vivarium.
The second channel can also be used as an on/off thermostat if preferred.
Evo Connected 3
Channel 1: Pulse/Dimming
Channel 2: Pulse/Dimming
Channel 3: On/Off
If your vivarium has two heat sources, this model is for you. Our favourite use will be the ability to run a secondary nighttime or background heater within the enclosure and control it with the same thermostat.
Evo Connected 3
Channel 1: Pulse/Dimming
Channel 2: Pulse/Dimming
Channel 3: On/Off
If your vivarium has two heat sources, this model is for you. Our favourite use will be the ability to run a secondary night time or background heater within the enclosure and control it with the same thermostat.
The Microclimate EVO Connected Thermostat is one of the reptile markets most exciting and highly anticipated products in years and is set to take reptile keeping to a whole new level.
In summary this thermostat has it all..
Multiple channels to control heating and lighting and monitor temperatures
Timing modes (per channel)
Simple: Constant or Day & Night
Advanced: Multi 8 Settings, Periodic, Seasons
All new high quality, colour, capacitative touch screen with large easy to read display
IP Rated waterproof sensor on every channel (2.5m cables)
Seasons Mode allows the recreation of a whole years environmental cycle
Ramp Times: control the length of time between temp changes for more natural climate control
Power output level shown per channel
Visual and Audible Alarms
Real time fault detection
Built in mounting solution for both the display and main control box allowing for easy, secure installation
Customise channel and thermostat names
Single Cable to the display allowing other cables to be kept out of sight with the main control box
Wifi Connectivity allowing real time monitoring and control of your enclosures from anywhere in the world (via iOs or android apps)
Web Browser remote dashboard
Cloud connectivity with 12 months of data logging for each channel on the app
Push notifications if an alarm is triggered, there is a power cut or your thermostat goes offline
Over the air updates included to keep your thermostat up to date
Generate reports for your whole collection and export the data to csv file
View multiple thermostats on one app
(note wifi is needed for app or cloud features)
1200w max load (600w max per channel)
Designed and manufactured in the United Kingdom
Full 5 Year Warranty
Evo Connected 2
Channel 1: Pulse/Dimming
Channel 2: On/Off
This model is perfect for a vivarium with a single heat source (e.g. a basking light or ceramic bulb) and a separate UVB lighting system (e.g. a UVB light source). In this scenario you would get complete automation of the day and night cycles and temperature readings on both sensors, allowing you to simultaneously record temperatures in two different areas of the vivarium.
The second channel can also be used as an on/off thermostat if preferred.
Compact, Mighty and packed full of digital technology. The big brother to the Ministat, the Ministat 600 has all the same great specs but with an increased maximum power output of 600w. Remember there is NO minimum load, so its just as good at controlling lower powered heaters as the ministat 100.
The Ministat has been a standard in the reptile industry for many years. The Ministat 600 ticks all the boxes as an affordable temperature control soloution for your reptile. On/Off temperature control is suitable for all types of heaters due to the temperature swing either side of the set point.
Control up to 600w of heaters from the one compact unit. High quality digital processesing combined with software developed and tested over many years ensures we are confident that the Ministat 600 is a device you can trust.
A recessed temperature control dial prevents any accidental changes to the set temperature so you can be certain that the temperature remains at the set point that you require.
With a temperature range of 19c to 35c the Ministat 600 has you covered for a wide range of reptiles. sensor.png IP Rated waterproof sensor ensures accurate temperature readings no matter the conditions.
The Microclimate B2 Pulse Thermostat is available in two temperature ranges;
Standard Range: 19-35C (B2)
High Range: 29-45C (B2HT)
Microclimate Pulse B2 and Pulse B2 High Temperature are digitally controlled thermostats offering Microclimate's HD pulse technology. The software developed over years allows Microclimate thermostats to pulse extremely smoothly and accurately. This provides the ultimate temperature control for non light emitting heat sources. Pulse B2 High Temperature can control any type of non light emitting heat source such as ceramics, heatmats, panel heaters etc.
No minimum load is required for Microclimate Pulse thermostats. Only the best electrical components go into building your Pulse B2 High Temperature and it is completely designed and manufactured in house in the United Kingdom. This allows our high standards to be maintained throughout software and manufacture.
Control up to 600w of heaters from the Pulse B2 High Temperature.
The connect is a dual channel device with one thermostat channel and one auxiliary channel which can be used to control lighting or misters. the maximum combined output is 600w.
The connect shares the same features as the evo connected range with being controlled by a mobile phone application rather than an inbuilt screen
Internet connection is required for setting up and changing settings on the thermostat but should the internet connection drop the thermostat will continue operating normally.
Note: Mobile Phone NOT included, you will require a device running iOS or Android.
Digitally controlled all in one heating system.
A reliable 500w UK made ceramic element is controlled by Microclimates class leading pulse temperature control. Software developed over many years ensures perfect temperature regulation.
Enclosed in a sturdy metal enclosure which is protected by a mechanical Bi-Metallic thermal trip to prevent the metal casing from reaching unsafe temperatures.
Only the best electrical components go into building of your AHS and it is completely designed and manufactured in house in the United Kingdom. This allows our high standards to be maintained throughout software and manufacture.
Set and forget - Simply set the temperature on the front of the unit and the AHS will provide years of maintenance free temperature control. Ideal for DWA species.
Temperature range of 19°c to 35°c.
The 500w ceramic has enough power for large enclosures or for smaller enclosures with power in reserve for those colder months of the year.
500w Maximum Output
Pulse Heater control
Digital temperature control and processing
1.5m sensor
5 Year warranty on Electronics, 1 year warranty on ceramic.
Designed and Manufactured in the United Kingdom
The Microclimate Evo Connected Pro is the ultimate controller for temperature and humidity.
As with the the Microclimate Evo Connected 2 and 3 thermostats the Microclimate Evo Connected Pro is equipped with a super high quality capacitive touch screen display, has sensors on every channel, cloud connectivity, ramp times, seasons and much more.
Wifi connectivity means you can monitor and control your thermostat from anywhere in the world using the Evo connected mobile application or a web dashboard.
The Evo Connected Pro has thee channels, each with its own temperature sensor which can monitor, display and record the temperature on the display and app, thereby allowing for data logging across the full temperature gradient of the enclosure.
Channel 1: Dimming/Pulse Thermostat
This channel controls your main heating source in the vivarium. Timer settings allow for easy day/night control of the heat source, either by dropping the temperature or turning off the heating altogether.
Channel 2: On/off channel
This channel is ideally suited to controlling the UV or other visual lighting in your vivarium, simply turning it on in the morning and off at night.
It can alternatively be used as a basic on/off thermostat should your setup require, for example running a heat mat or low wattage ceramic as background or nighttime heat.
Channel 3: On/Off with Humidity Sensor
Attach to a fogger, mister, rain system or similar to automatically regulate the humidity level in your terrarium.
Other Key Features:
Stylish Glass Fronted Touch Screen Display with single cable
Main Control Box to keep cables out of sight
Built in mounting solutions
24 hour temp graph
Android/iOS apps available free of charge
1 years data storage in the cloud
Control multiple thermostats on a single app/login
Invite friends, family, co-workers to your collection with individual access levels
Ramp times
Timing options - constant, day/night, multi, seasons, periodic
Alarms and push notifications
Automatic error checking
Automatic time setting and correction
Over the air updates
Screen Lock
Externally accessible fast blow fuse
Temp Range 0-100C
2.5m long IP Rated waterproof sensors on temp channels
1200w combined max load (Max 600w per channel)
5 Year Warranty
Designed and Manufactured in the United Kingdom
