The Microclimate Ministat 100 thermostat is the perfect combination of value and reliability.  With an industry leading 5 year warranty, the ministat 100 is the perfect reptile thermostat to control heat mats or other (non light emitting) heaters up to a maximum of 100w.

Read more less

Compact, Mighty and packed full of digital technology. The big brother to the Ministat, the Ministat 600 has all the same great specs but with an increased maximum power output of 600w.  Remember there is NO minimum load, so its just as good at controlling lower powered heaters as the ministat 100. The Ministat has been a standard in the reptile industry for many years. ​​ The Ministat 600 ticks all the boxes as an affordable temperature control soloution for your reptile. On/Off temperature control is suitable for all types of heaters due to the temperature swing either side of the set point. Control up to 600w of heaters from the one compact unit. ​ High quality digital processesing combined with software developed and tested over many years ensures we are confident that the Ministat 600 is a device you can trust. A recessed temperature control dial prevents any accidental changes to the set temperature so you can be certain that the temperature remains at the set point that you require. With a temperature range of 19c to 35c the Ministat 600 has you covered for a wide range of reptiles. sensor.png IP Rated waterproof sensor ensures accurate temperature readings no matter the conditions.

Read more less

The Microclimate B2 Pulse Thermostat is available in two temperature ranges; Standard Range: 19-35C (B2) High Range: 29-45C (B2HT) Microclimate Pulse B2 and Pulse B2 High Temperature are digitally controlled thermostats offering Microclimate's HD pulse technology. The software developed over years allows Microclimate thermostats to pulse extremely smoothly and accurately. This provides the ultimate temperature control for non light emitting heat sources. Pulse B2 High Temperature can control any type of non light emitting heat source such as ceramics, heatmats, panel heaters etc. No minimum load is required for Microclimate Pulse thermostats. Only the best electrical components go into building your Pulse B2 High Temperature and it is completely designed and manufactured in house in the United Kingdom. This allows our high standards to be maintained throughout software and manufacture. Control up to 600w of heaters from the Pulse B2 High Temperature.

Read more less

Digitally controlled thermostat offering Microclimate's HD Dimming technology. The software developed over years allows Microclimate Dimmers to dim extremely smoothly. This aids in the least disruption for your animal and the ultimate in temperature control. Dimmer B1 can control any type of heat source whether it be light emitting or non light emitting. The same precise temperature control will be maintained.​ No minimum load is required for Microclimate Dimming thermostats. So the Dimmer B1 is a real all rounder when it comes to controlling your heating requirements. Only the best electrical components go into building your Dimmer B1 and it is completely designed and manufactured in house in the United Kingdom. This allows our high standards to be maintained throughout software and manufacture. Control up to 600w of heaters from the Dimmer B1. A recessed temperature control dial prevents any accidental changes to the set temperature so you can be certain that the temperature remains at the set point that you require. Built in diagnostics are constantly running to ensure that your thermostat is running trouble free. With a temperature range of 19c to 35c the Dimmer B1 (Standard) has you covered for a wide range of reptiles. With a temperature range of 29c to 45c the Dimmer B1 High Temperature can cater for those reptiles who like higher temps. the Dimmer B1 High Temperature can cater for those reptiles who like higher temps. IP Rated waterproof sensor to ensure accurate temperature readings no matter the conditions. 

Read more less

The connect is a dual channel device with one thermostat channel and one auxiliary channel which can be used to control lighting or misters. the maximum combined output is 600w. The connect shares the same features as the evo connected range with being controlled by a mobile phone application rather than an inbuilt screen Internet connection is required for setting up and changing settings on the thermostat but should the internet connection drop the thermostat will continue operating normally. Note: Mobile Phone NOT included, you will require a device running iOS or Android.

Read more less

The Microclimate EVO Connected Thermostat is one of the reptile markets most exciting and highly anticipated products in years and is set to take reptile keeping to a whole new level.   In summary this thermostat has it all.. Multiple channels to control heating and lighting and monitor temperatures Timing modes (per channel) Simple:  Constant or Day & Night Advanced:  Multi 8 Settings, Periodic, Seasons All new high quality, colour, capacitative touch screen with large easy to read display IP Rated waterproof sensor on every channel (2.5m cables) Seasons Mode allows the recreation of a whole years environmental cycle  Ramp Times: control the length of time between temp changes for more natural climate control Power output level shown per channel Visual and Audible Alarms Real time fault detection Built in mounting solution for both the display and main control box allowing for easy, secure installation Customise channel and thermostat names Single Cable to the display allowing other cables to be kept out of sight with the main control box Wifi Connectivity allowing real time monitoring and control of your enclosures from anywhere in the world (via iOs or android apps) Web Browser remote dashboard Cloud connectivity with 12 months of data logging for each channel on the app Push notifications if an alarm is triggered, there is a power cut or your thermostat goes offline Over the air updates included to keep your thermostat up to date Generate reports for your whole collection and export the data to csv file View multiple thermostats on one app (note wifi is needed for app or cloud features) 1200w max load (600w max per channel) Designed and manufactured in the United Kingdom Full 5 Year Warranty Evo Connected 2 Channel 1: Pulse/Dimming Channel 2: On/Off This model is perfect for a vivarium with a single heat source (e.g. a basking light or ceramic bulb) and a separate UVB lighting system (e.g. a UVB light source).  In this scenario you would get complete automation of the day and night cycles and temperature readings on both sensors, allowing you to simultaneously record temperatures in two different areas of the vivarium.   The second channel can also be used as an on/off thermostat if preferred.  Evo Connected 3 Channel 1: Pulse/Dimming Channel 2: Pulse/Dimming Channel 3: On/Off If your vivarium has two heat sources, this model is for you.  Our favourite use will be the ability to run a secondary nighttime or background heater within the enclosure and control it with the same thermostat.  

Read more less

Evo Connected 3 Channel 1: Pulse/Dimming Channel 2: Pulse/Dimming Channel 3: On/Off If your vivarium has two heat sources, this model is for you.  Our favourite use will be the ability to run a secondary night time or background heater within the enclosure and control it with the same thermostat.   The Microclimate EVO Connected Thermostat is one of the reptile markets most exciting and highly anticipated products in years and is set to take reptile keeping to a whole new level.   In summary this thermostat has it all.. Multiple channels to control heating and lighting and monitor temperatures Timing modes (per channel) Simple:  Constant or Day & Night Advanced:  Multi 8 Settings, Periodic, Seasons All new high quality, colour, capacitative touch screen with large easy to read display IP Rated waterproof sensor on every channel (2.5m cables) Seasons Mode allows the recreation of a whole years environmental cycle  Ramp Times: control the length of time between temp changes for more natural climate control Power output level shown per channel Visual and Audible Alarms Real time fault detection Built in mounting solution for both the display and main control box allowing for easy, secure installation Customise channel and thermostat names Single Cable to the display allowing other cables to be kept out of sight with the main control box Wifi Connectivity allowing real time monitoring and control of your enclosures from anywhere in the world (via iOs or android apps) Web Browser remote dashboard Cloud connectivity with 12 months of data logging for each channel on the app Push notifications if an alarm is triggered, there is a power cut or your thermostat goes offline Over the air updates included to keep your thermostat up to date Generate reports for your whole collection and export the data to csv file View multiple thermostats on one app (note wifi is needed for app or cloud features) 1200w max load (600w max per channel) Designed and manufactured in the United Kingdom Full 5 Year Warranty Evo Connected 2 Channel 1: Pulse/Dimming Channel 2: On/Off This model is perfect for a vivarium with a single heat source (e.g. a basking light or ceramic bulb) and a separate UVB lighting system (e.g. a UVB light source).  In this scenario you would get complete automation of the day and night cycles and temperature readings on both sensors, allowing you to simultaneously record temperatures in two different areas of the vivarium.   The second channel can also be used as an on/off thermostat if preferred.   

Read more less

The Microclimate Evo Connected Pro is the ultimate controller for temperature and humidity.  As with the the Microclimate Evo Connected 2 and 3 thermostats the Microclimate Evo Connected Pro is equipped with a super high quality capacitive touch screen display, has sensors on every channel, cloud connectivity, ramp times, seasons and much more.   Wifi connectivity means you  can monitor and control your thermostat from anywhere in the world using the Evo connected mobile application or a web dashboard. The Evo Connected Pro has thee channels, each with its own temperature sensor which can monitor, display and record the temperature on the display and app, thereby allowing for data logging across the full temperature gradient of the enclosure.   Channel 1: Dimming/Pulse Thermostat  This channel controls your main heating source in the vivarium.  Timer settings allow for easy day/night control of the heat source, either by dropping the temperature or turning off the heating altogether.  Channel 2: On/off channel This channel is ideally suited to controlling the UV or other visual lighting in your vivarium, simply turning it on in the morning and off at night. It can alternatively be used as a basic on/off thermostat should your setup require, for example running a heat mat or low wattage ceramic as background or nighttime heat. Channel 3: On/Off with Humidity Sensor Attach to a fogger, mister, rain system or similar to automatically regulate the humidity level in your terrarium.  Other Key Features: Stylish Glass Fronted Touch Screen Display with single cable Main Control Box to keep cables out of sight  Built in mounting solutions  24 hour temp graph Android/iOS apps available free of charge 1 years data storage in the cloud  Control multiple thermostats on a single app/login Invite friends, family, co-workers to your collection with individual access levels Ramp times Timing options - constant, day/night, multi, seasons, periodic  Alarms and push notifications  Automatic error checking  Automatic time setting and correction Over the air updates Screen Lock Externally accessible fast blow fuse Temp Range 0-100C 2.5m long IP Rated waterproof sensors on temp channels  1200w combined max load (Max 600w per channel) 5 Year Warranty Designed and Manufactured in the United Kingdom

Read more less

Accurately controls terrarium temperatures Ideal for use with Heat Mats and Heat Cables From 20°C up to 35°C (68°F – 95°F) Waterproof remote sensor Controls heating devices up to 100 W/ 300 W Recessed temperature setting to avoid accidental setting or tampering Waterproof remote sensor with 6 foot / 185cm probe cord Red LED heat indicator shows when heating element is ON Can be used with the following Exo Terra heating sources: Heat Mat - Heat Cable - Ceramic Heater Reptiles are ectotherm, and use heat from an external source to thermoregulate their optimal body temperature. Most reptiles use direct radiant heat from the sun in combination with conductive heat from sun-heated surfaces such as branches, rocks or other heat accumulating structures. Providing such an appropriate, species related, temperature gradient in the terrarium is an important factor in successful reptile keeping. With the Exo Terra 100 W/ 300 W Electronic ON/OFF Thermostat you can create a well controlled heating system that allows you to maintain the required temperature conditions similar to those found in a desert or tropical environment. The Thermostat will also help to prevent overheating and undercooling during hot summer days or cold winter nights. The electronic Triac switch keeps the temperature at the desired setpoint with a much higher accuracy compared to conventional thermostats and virtually eliminates temperature swings in the terrarium. Simply connect your Heat Mat, Heat Cable or Ceramic Heater to the Exo Terra ON/OFF Thermostat, set the preferred temperature and place the heat sensor in the desired spot. The Red LED heat indicator will light up when the heating device is ON and will shut off once the desired temperature has been reached. The recessed dial of the thermostat will prevent accidental temperature change if the device is being handled. The waterproof remote sensor can be safely used in highly moist terrariums and aquatic environments. The Exo Terra Thermostat should be set according to the needs of the animals. Thoroughly research the preferred optimum temperature range (POTR) for your specific reptile, so you can create the correct temperature gradients inside the terrarium to allow your reptiles to thermoregulate.

Read more less

Exo Terra Thermostat 600w & Hydrostat 100w, PT2464

Read more less

Reptile Thermostat – 300 W Dimming & Pulse Proportional Perfect Control for Precision Heating Meet the ultimate dimming thermostat and pulse thermostat designed for reptiles. Featuring advanced dimming & pulse proportional technology, this thermostat maintains your terrarium between 18 °C–38 °C (64 °F–100 °F) with exceptional accuracy—minimizing temperature fluctuations and ensuring your reptile’s habitat mimics natural conditions. Key Features: Reptile thermostat built for dependable 24‑hour temperature management Supports up to 300 W heating devices: heat mats, cables, ceramic heaters, incandescent bulbs Dimming thermostat mode smoothly adjusts current to maintain stable warmth, virtually eliminating hot/cold swings Pulse thermostat responsiveness ensures precise temperature control and keeps your setup consistent Color‑coded LED (Red = Heating ON, Blue = Set temperature reached) Recessed dial prevents accidental temperature changes Waterproof remote probe ideal for humid or aquatic terrariums Includes grounded plug & surge protection for added safety Why It Matters for Reptile Keepers Reptiles are ectotherms relying on environmental heat to regulate their body temperature. This pulse thermostat offers superior control, closely replicating a reptile’s natural temperature gradient—whether your pet requires desert heat or tropical warmth. Say goodbye to overheating or undercooling—and hello to a healthier, happier reptile. Simple Setup & Safe Operation: Plug in your heating device (heat mat, heat cable, ceramic heater, or bulb) Position the waterproof sensor at your chosen location Set your desired temperature via recessed dial Monitor LED indicators for real‑time status Use Recommendations: If you're using a visible-light bulb (e.g., basking spots), run the thermostat during daylight hours only (sunrise to sunset)—either manually or via a timer—to avoid disrupting your reptile’s night cycle. Specifications Temperature Range: 18 °C–38 °C (64 °F–100 °F) Max Load: 300 W Includes waterproof remote probe & grounded plug Safety Features: surge protection, fuse, memory IC This precision reptile thermostat is the ideal upgrade for hobbyists seeking reliable, stable thermal environments. With its dimming thermostat functionality and pulse thermostat accuracy, it's a game‑changer for achieving perfect temperature gradients in your terrarium.

Read more less

The HabiStat Mat Stat is a renowned thermostat, perfect for controlling heat mats & low powered heaters (max. 300 watts). It switches your heater to full-power until the set temperature is reached & then switches it off until the temp drops below the set value. A power/heat indicator signals when it's in use. This thermostat is easy to operate, with a dial calibrated in F & C, & a user guide is also provided. Choose from black or white, & avail of its 5-year guarantee. IMPORTANT: Do NOT use this thermostat for controlling light bulbs, as it will distress your animals & overwork the lamps, likely leading to the thermostat failuring. For light emitting heat sources, use a HabiStat Dimming Thermostat.

Read more less